Do Throttle Controllers Work? – Breaking The Myth

Loads of Confusion seem to exist regarding the efficacy of throttle response controllers. Some say they are worth using, while some others don’t find them of any good.  What’s the reality? 

Do throttle controllers work? Well, the straightforward answer is YES. A Throttle response controller is a device that eliminates the throttle’s slow response by maintaining a seamless signal from the gas pedal to the throttle. As a result, you have more control over the acceleration timing. 

This article discusses more on the topic. Let’s get going. 

 

Do Throttle Controllers Work? 

Since the introduction, throttle response controller devices have been often misunderstood. Those who opt for buying an ETC (Electronic throttle controller) get mixed advice and information, especially from different internet sources, and the confusion intensifies. 

First of all, you should not be muddling the functionality of a device. 

ETCs are not certainly recruited to speed up your car or to improve the gas mileage, but it does boost the acceleration performance by increasing pedal sensitivity. 

A throttle response controller is simply a tiny electronic device that maintains the signal between the gas pedal and the engine management. It reduces pedal lag.

An incessant signal from the gas pedal to the throttle means your car’s accelerator system is working smoothly. And the reduced throttle lag would make your driving experience significantly better. 

Throttle controller devices provide you with more control to tune the accelerator pedal’s response while driving. So if you focus right on the actual functionality of the EVC throttle controllers, you are on the money. 

Let’s dig further into the functionality of ETC. 

 

What Does an Electronic Throttle Controller Actually Do?

Back in the old days, throttle controllers would work in a different way. They followed a simple mechanical system:  you push the throttle pedal, the pressure opens up the throttle, allows air to flow into the engine, burns the fuel, and generates power for the wheels. The more you push the accelerator pedal, the faster your car moves.

However, the mechanism of throttle controllers has changed significantly in modern vehicles. Unlike the older controllers, an ETC throttle response controller pursues a more sophisticated functionality, which involves fewer moving parts but emphasizes electronic signals.

In an ETC, when you depress the accelerator pedal, the controller system converts your pedal’s pressure into an electronic signal instead of opening up the throttle in the first place. That signal then goes to the electronic throttle Unit (ETU). 

The ETU processes the throttle input and opens up the throttle. Sounds a bit complicated? 

 

Why It’s Important to Use an Electronic Throttle Controller? 

You may wonder what makes a throttle controller significantly different from a mechanical throttle response controller. And if they both open up the throttle, why did vehicle manufacturers decide to upgrade to a complicated system? 

There are a number of reasons that differentiate an ETC from a mechanical controller. 

  • ETCs involve fewer moving parts which lowers the risk of physical damage to the acceleration system’s components.
  • Reduces the hassle of maintenance. 
  • ETCs can optimally process the signal that you put on the gas pedal. Resultantly, it increases performance and makes your driving experience more fun. 
  •  ETCs correct the errored inputs from the pedals and balance the factors that affect the speed and direction of the car.
  • Makes your driving experience safer. 

 

How To Install a Throttle Controller? 

Installing the throttle controller in any vehicle is easy, and it takes only a few minutes. If you are thinking about replacing the current throttle controller or getting a new one, the entire procedure follows only these simple steps: 

Step 1: Wipe down the throttle plug area carefully with an alcohol wipe. 

Step 2: Turn off the vehicle engine and wait for a few minutes before installing it.

Step 3: Unplug the factory plug from the accelerator pedal and clip the controller’s adapter to the throttle body.  

Step 4: Plug in the factory pedal plugs into the other side of the ETC adapter. 

Step 5: Place the display and cable anywhere in the dashboard, and you are good to go. 

However, these are some general steps usually most ETC throttle controller installation process involves. These steps may vary based on manufacturers. 

 

Etc Throttle Controller Modes 

The number of modes on the ETCs may vary based on the manufacturers.  For example, the idrive throttle controller has 3 modes, while on the other hand, the EVC throttle controller has 4.

But generally, there are over 3 modes that can be seen on most ETC devices. Overall, the best throttle response controller will have these modes available.

The Ultimate Mode

This is the first driving mode you’ll find on your throttle response controller. The ultimate performance mode is where you can choose between 0 and 9 levels of responsiveness.

The higher you set the responsiveness mode, the more furious your controller becomes. 

The Economy Mode

This second mode is essentially useful when you need to move at a glacial pace, such as in traffic. The economy mode will save fuel and keep your throttle response at an average level.

The Economy mode smoothens the ride. Like the ultimate mode, you can set the responsiveness from 0 to 9 under this economy mode too. 

The Auto Mode: 

The third mode is the Automatic control mode which automatically chooses the throttle mapping based on the driver’s driving style and the pedal pressure.

Suppose you are stuck in traffic or moving in a stop-start situation, the automatic mode will set itself to a reduced level of response. Or, if you are driving fast, this auto mode will choose an increased level of throttle response. 

There is an extra mode available on the EVC throttle controller: the normal mode.

You can choose between any mode based on the situation you are in. For choosing a better throttle response mode, we recommend driving through the modes to see how they react to your specific vehicle. 

 

People Also Inquire About

Can You Drive with Electronic Throttle Control Light On?

When you see your Electonic throttle controller showing a warning light, it may indicate several things. 

  • A change in your fuel economy. 
  • Your throttle controller may have any damage which you need to fix 
  • A hesitating throttle response
  • A concerning decrease in mileage 

 

Will You Feel a Big Improvement with Your Throttle Controller?

Installing a throttle controller will take your driving experience to the next level. You’ll have greater control over your vehicle’s acceleration system by removing throttle lag and increasing the signal flow in your car’s engine management.

 

Do Throttle Controllers Increase Fuel Consumption?

Throttle controllers are great for fuel economy. If you find yourself stuck in a situation where you need to accelerate gradually (for example, in traffic), you can set your ETC to economy mode or on auto mode to reduce fuel consumption.

 

Do You Need a Throttle Controller for a Four-Wheel Drive?

Electronic throttle controllers are great useful devices for four-wheel drive. ETCs improve the fuel economy of your vehicle, provide you with more control over your acceleration, and improve safety.

 

Does A Throttle Controller Make Your Car Faster?

Yes, ETC can be a sprint booster by reducing pedal lags. But throttle controllers are not solely for increasing a car’s speed; they are primarily for establishing a seamless connection between the gas pedal and the throttle, which lets you have more command over the acceleration system.

 

If you have more questions in your mind you can check this video:

 

Finally, Do Throttle Controllers Really Works?

Do throttle controllers work? Yes, for four-wheel vehicles, the throttle controllers are a great choice. It’s an electronic device that improves the signals between your accelerator pedal and throttle.

In the late 80s, the electronic throttle controller emerged and replaced the older mechanical throttle controllers completely. For improved sensors and accurate signal transference, this device has become a top priority for numerous drivers. 

This article has elaborately discussed everything you need to know about throttle controllers.

 

You may also like:

Leave a Comment