Nissan is an excellent option if you’re looking for a car with a remote start. It allows you to start your car from a distance and is convenient in different weather conditions. It’s also helpful to ensure your car runs before you head out.
But how can I fix it if the Nissan remote starts not working?
- First, check the battery in your remote. If it’s low, replace it with a new one.
- Next, make sure that the remote is correctly paired with your car.
- If the remote is still not working, it’s possible that the remote start system in your car needs to be reset.
- To do this, consult your owner’s manual.
Whatever may be the cause, in this article, I will discuss the reasons and solutions to get your remote to start working again. Before that, let’s learn how Nissan Remote Start works in any car model.
Why Did Nissan Remote Start Not Working?
If your Nissan remote start is not working, there are a few potential causes, and it’s always nice to know the cause of your problem.
Because sometimes, it might seem like there are an infinite number of possibilities, but in reality, only one major issue will produce these problems. Some common reasons a Nissan remote start may not be working include:
- The remote system is not turned on,
- The key is not in the vehicle
- The doors, hood, and truck are not all closed
- The battery in the key fob is dead
- The remote starter may be in Valet Mode
- The remote starter is used Properly
- Something interfering with the signal, such as being too far away from the vehicle
How Does Nissan Remote Start Work?
The system uses a fob, similar to your key, wirelessly sending a signal to your car. When you press the button on the fob, it sends a signal to the car that turns on the engine and starts the car. The car will stay on for a certain amount before turning off again, usually about 10 minutes.
Also, you can extend the time by pressing the button on the fob again. If you have an automatic transmission, the car will turn off if it is shifted out of the park.
In the same way, you can also manually turn off the car by pressing the button on the fob for three seconds or by inserting the key into the ignition and turning it to the “off” position.
The engine will also turn off if it reaches a specific temperature, so you don’t have to worry about overheating.
And finally, if the battery in the key fob gets too low, the car will also turn off. So there are plenty of built-in safeguards to prevent accidents or problems with Nissan’s Remote Start system. To know more, you can follow Service Bulletin.
What To DO If Your Nissan Remote Not Working
It is a valid question for many Nissan owners. If you face any fundamental or technical problem, you should try to fix the problem as soon as possible.
Because a remote start provides an excellent level of convenience and saves you money in the long run. Mainly living in an area with extreme temperatures.
Also, a remote start can help prolong your engine’s life by preventing it from being overworked in hot or cold weather. So, let’s learn what to do if your Nissan remote start isn’t working.
1. Replace the Battery If it Is Old Enough
If your Nissan’s remote start feature isn’t working correctly, there are a few essential solutions you can try. First, make sure the battery in your key fob is fresh.
If it’s been a while since you’ve replaced the battery, that may be the problem. You should also check to see if the controller and battery are correctly paired with your car. If it’s not, you’ll need to repair it according to your owner’s manual instructions.
2. Install and Reset Battery:
If those essential solutions don’t solve the problem, there are a few more technical ones you can try. First, check to see if the remote start system is installed correctly.
If this is not, follow your owner’s manual instructions to install it. You should also check remote starter switch is “ON” and that the key is in the vehicle.
If not, do that accordingly. Sometimes your Nissan’s remote start system may need to reset, which can often do by simply disconnecting and reconnecting the battery.
3. Use Remote Starter Properly
Make sure you’re using the remote starter properly. Different brand starters have different starting procedures. For example, the design of some remotes requires only a single push of the button to activate, while others require two additional pushes.
If it’s not working, check your button placement and make some adjustments.
Plus, you must hold the button on the remote control to start the engine for some buttons.
So, if you’re remote starter isn’t working, check the remote properly. It will help you simultaneously press the lock and unlock buttons on the remote.
4. Check Signal And Distance Covered:
If you’re comfortable doing some basic troubleshooting, there are a few things you can try on your own.
First, check all the signals related to your remote start system to ensure they’re not interfering with any other objects. You can check the problem due to the antenna or receiver and replace them if necessary.
5. Check Valet Mode
Your Nissan’s remote starter may be in “Valet Mode.” If your car has stop/start capabilities, the remote starter will automatically disable those features when Valet Mode is turned “ON.” It is to prevent the engine from starting while the car is unattended.
To check if your remote starter is in Valet Mode, look for a small light on the dash that says “Valet.” If this light is lit, your remote starter is in Valet Mode.
You can quickly turn off Valet Mode by pressing and holding the button on your key fob for three seconds.
Once the light goes out, stop/start should generally work again. If you’re still having trouble, consult your owner’s manual or contact a Nissan dealership for assistance.
Check Out How You Can EXIT from Nissan Valet Mode:
Use Nissan Remote Start App
Nissan’s remote start app allows you to start, lock and unlock your car remotely. Here’s how to use it:
- Download the Nissan Connect app from the App Store or Google Play.
- Register for a Nissan Connect account and log in.
- Add your car to the Nissan Connect app by entering your vehicle’s VIN.
- Once your car number is added, you can remotely start, lock and unlock it from the app.
- To remotely start your car, simply tap the “Remote Start” button in the app and confirm that you’d like to start the engine. Your car will start, and the A/C will cool down the interior.
- To stop the engine, tap the “Stop Engine” button in the app.
- You can also use the Nissan Connect app to lock and unlock your car doors remotely. Simply tap the “Lock” or “Unlock” buttons in the app to activate or deactivate these features.
Check This Video To Learn How to use Nissan Connect
More Questions & Answers
How do I Reset my Nissan Remote Car Starter?
Please turn on your car’s ignition by inserting your Key and turning it to the accessory position (or press the start button without pushing the brake pedal).
To prevent unauthorized use of your remote vehicle starter, press the Lock button on the device. Switch back to the “off” position after five seconds of turning it on (or press the start button again).
In Nissan’s case, how much does it cost to program the keys?
Cargo vans and some of the actual vehicles may still need a key, but Nissan’s keyless smart fob, i-key, is now standard on most models, including the Altima, Maxima, and Pathfinder. Programming a new Nissan key fob may cost anywhere from $125 to $400.
Why Won’t Nissan Key Fob Work Though I Change the Battery?
A dead battery is the most probable culprit if a key fob fails to operate. However, there may be more severe issues with your keyfob.
If your key fob still does not function after a new battery is installed, you may require a new key fob or vehicle door lock repair.
How Can I Start my Nissan Without a Smart Key?
If your Nissan vehicle has a key fob port, insert the fob into the port and push the START/STOP button while tapping the brake pedal or clutch.
If your Nissan doesn’t have a port, you may use the START/STOP button on the key fob while stepping on the brake or clutch pedal.
Are You Solved With Your Nissan Remote Now?
We have outlined a few potential solutions how to fix Nissan remote start not working. However, it is always best to consult with a technician or your dealer if you are experiencing difficulties with your Nissan remote start.
They will be able to help you determine the exact source of the issue and provide a solution.
But fortunately, most of these issues are relatively easy to fix and shouldn’t cause any long-term problems. So, have you had any luck fixing your Nissan remote start on your own? If so, please share your tips in the comments below. Thanks for reading.
